DEGREASERS > BY SPRAY
Medium alkalinity powder degreaser for galvanic and phosphating lines.
High alkalinity liquid product for degreasing of steel surfaces.
Medium alkalinity product to remove though oils from steel and copper alloys.
Slightly alkaline liquid product. Suitable to degrease copper and alloys also for quick operations in line (e.g. coil and wire). To be used also by spray.
Interaction liquid degreaser for carbon steel and stainless steel. Suitable for applications in single-stage washing machines. It has a strong protective power.
Slightly alkaline powder product. Suitable for any metal, free of phosphates and caustic alkalis.
Slightly alkaline product used to degrease aluminium surfaces. High content of buffering and inhibiting substances avoid the metal surface etching
Slightly alkaline liquid product. Suitable for degreasing of copper alloys also for quick operation in line. It avoids hydroxides precipitation and is chosen when an alkaline passivation with triazoles follows. To be used also by spray.
Low alkalinity liquid product to be used for degreasing and simultaneously protection of carbon steel. No rinse.
Neutral liquid product. It is used to degrease, brighten up and protect surfaces. No following rinse required.
Alkaline liquid product. Rich in sequestering agents for aluminium.
It is used to clean die casting, pressure die casting and pressing moulds.
Alkaline liquid product. Suitable for degreasing and simultaneous removal of drawing stearates and oils. it can be also used in electrolytic plants both in anodic and cathodic current.
Alkaline liquid product.
Rich in carbonate, it is mainly used in removal of animal and vegetal oils and greases.
To be used also by spray.
Medium alkalinity liquid product for degreasing of all metal surfaces, light alloys included.
Highly concentrated acidic degreaser, sulphuric acid based, for the cleaning and etching of alumium and aluminium alloys surface
Alkaline liquid product suitable for cleaning of any metal usable by dip and spray.
Powder products for washing machines used to clean mechanical parts
Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates, is mainly used to remove by spray the polishing pastes. E.g. in plating lines.
Series of liquid or powder degreaser/dephosphatizer. For more details see â€ťCold formingâ€ť section.
Alkaline powder product. It is used to degrease and simultaneously remove oxides, phosphates and iron oxalates. Since it contains high amount of sequestering agents it also eliminates drawing soaps rich in calcium.
Strong alkaline desgreaser used also in dephosphating of carbon steel and etching of aluminium and alloys.
Low alkaline product, compatible with profiling emulsion, for cleaning of coils from slitter in tubesplant.
Slightly alkaline liquid product.
Suitable for spray and immersion application for non etching cleaning of the aluminium surfaces.
Slightly alkaline liquid product.
Free of silicates, it can be used on any metal.
It is mainly used in degreasing of light alloys where silicates are not allowed.
To be used also by spray.
Solvent based acid product to be used as delivered or emulsified in water to remove particularly though oils.
Slightly alkaline degreaser, it is used to clean the surfaces from oil and zinc oxides. The formulation is mainly used in cleaning of coils on pre-painting lines
High performing degreaser used for chemical and electrolytic degreasing
Highly rinsing alkaline degreaser-dephosphating
Slightly alkaline degreaser for in line spray cleaning of stainless steel surfaces before annealing process. The product is totally free of salts avoiding stains formation in the annealing step
Mild alkaline degreaser to be used at medium low temperature. It does not saponify rolling oils of animal or vegetal nature avoiding foam formation
Neutral degreaser used on all metals, it is free of alkaline compounds. Mainly used for mineral oils removal.
Alkaline degreaser for chemical and electrolytic degreasing lines
Moderate alkaline degreaser with high concentration and rinsing properties. It can be used on all substrates
Alkaline degreaser for high energy-saving pre-treatment processes.
Alkaline product for degreasing of coils in continuous and the simultaneous etching of aluminium and/or galvanized surfaces.
Alkaline degreaser mainly used in cleaning wires after wet drawn
Acid degreaser mainly used in processes followed by acid etching, compatible with the product.
Slightly alkaline liquid product to replace strong caustic blend working at lower temperature and with a higher degreasing power.
Highly alkaline liquid degreaser used to degrease the surface before an electrolytic deposition, a chemical conversion process, enamelling or brightening.
Slightly alkaline degreaser, it is used to clean the surfaces from oil and zinc oxides. The formulation is mainly used in cleaning of coils on aging and pre-painting lines
Slightly alkaline powder product. Suitable for any metal, free of caustic alkalis, phosphates and silicates.
Isoparaffinic solventes based product, emulsifiable, for cold degreasing of pieces highly contaminated with oils and greases.
Acid degreaser for stainless steel, free of phosphoric acid and surfactants, for spray application
Acid degreaser, free of phosphoric acid, for stainless steel, for spray application. The product also carries out a pickling action on light oxidations.
Slightly acid liquid product. Innovative product alternative to phosphodegreasing. It degreases the surfaces by forming a conversion layer that protects the surfaces and increases the rubber bonding capacity. Free of phosphates, it avoids problem of sludge formation and phosphate abatment. Suitable on any metal in spray and immersion plants.
Degreaser decontaminant for drawn stainless steel wire.
Acid degreasing/etching agent for preparation of aluminium and light alloys to painting in spray plants.
Acid degreaser for preparation of aluminium and light alloys prior to painting in spray plant. It carries out also a slight etching action.
Traditional alkaline etching degreasing. Suitable for higher surface etching