LUBRICANTS > COLD FORMING
Degreaser lubricant for last drawing step, hydrosoluble, vegetable soaps based. The product leaves a clean and bright wire and, thanks to its high detergent capacity, it can be used also only as detergent.
Additivated copper sulfate for chemical coppering of steel wire.
Non-reactive water based polymeric lubricant, for cold forming of carbon steel, stainless steel and non-ferrous materials. Compared to the traditional polymeric lubricants, it is suitable for high reductions. Condorlube DF 18 can be used in substitution of the traditional conversion treatments (phosphating and oxalating) or salting.
Synthetic, water soluble lubricant for wet drawing of wires of any metal.
Synthetic coolant containing graphite for wet drawing of wires.
Chloroparaffin based drawing oil.
Aliphatic synthetic isoparaffine based evaporable product to be used emulsified in water. It leaves a dry to touch surface.
Inorganic Alkaline dry lubricant for metal forming
Emulsion lubricant for forging and cutting of carbon steel.
Deep forging paste for stainless steel. Thanks to its special additives, guarantees good results in high pressure processes.
Lubricant polymer in aqueous emulsion for cold forming of carbon steel alloyed
Chlorine free synthetic lubricant for drawing of stainless steel rods and tubes.
Chlorine free synthetic lubricant for drawing of carbon steel rods and tubes.
Chlorine free, synthetic lubricant for drawing of high alloys and stainless steel rods and tubes.
Chlorine free synthetic lubricant for drawing of high alloys and stainless steel bars and profiles.
Special fluid with additives, designed for Yellow alloys drawing, extrusion and stamping. Condorlube TR 4 SB contains protectives and inhibiting additives.
Lubricating paste washable with water for heavy operations.