FLAT PRODUCTS > CARBON STEEL > COIL COATING
Chrome free multimetal nanotechnological passivating product, it can be used on surfaces cover with phosphates or complex oxide conversion coatings.
Balanced formulation for the make up of nanotechnological passivating solutions.
Nanotechnological Multimetal Nickel, Cobalt and Chrome free conversion treatment. It can be used diluited in water in spraying lines or in chemical coater. No rinsing nor passivation steps are necessary
Nanotechnological conversion coating used for chemical coater applications in one step process. After the application the part can be dried and painted. It leaves a slightly coloured coating.
Nanotechnological dry in place conversion coating free of resins to be used in spray line diluited in water.
Traditional nitro cobalt treatment for production of iron, nickel and cobalt complex oxides conversion coating, excellent for paint adhesion
Conversion product based on complex oxides, free from Co and Ni for coil coating lines.
Pretreatment primer used on metal coated steels (I.e. Hot dip galvanized) or aluminium providing on them a thin organic and inorganic anticorrosive layer of approx 1 μm thickness.
Slightly alkaline degreaser, it is used to clean the surfaces from oil and zinc oxides. The formulation is mainly used in cleaning of coils on pre-painting lines
Moderate alkaline degreaser with high concentration and rinsing properties. It can be used on all substrates
Alkaline product for degreasing of coils in continuous and the simultaneous etching of aluminium and/or galvanized surfaces.
Trivalent and hexavalent chromium based convertion and passivation product, multimetal.
Passivating agents preparation, feeding and recycling systems for chemical coaters.