LONG PRODUCTS > MULTIMETAL > ALUMINIUM AND ALLOYS
Degreasing additive to add to degreasing and pickling baths working at spray and dip.
Alkaline liquid product. To be used no rinse for degreasing and simultaneous protection of steel surfaces. To be used by spray or immersion. No following rinse required.
Slightly alkaline product used to degrease aluminium surfaces. High content of buffering and inhibiting substances avoid the metal surface etching
Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates. It is mainly used to remove the polishing pastes. e.g in plating lines.
Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates, is mainly used to remove by spray the polishing pastes. E.g. in plating lines.
Condorine R 64 is a low impact product designed for all metals and any kind of plastic. It is mainly used to remove oils and greases from highly contaminated pieces, mainly by dissolving them. No rinse. It evaporates very quickly with air.
Evaporable detergent mainly used to remove drawing and rolling oils
Mild alkaline degreaser to be used at medium low temperature. It does not saponify rolling oils of animal or vegetal nature avoiding foam formation
Drawing lubricant. It does not leave any residuals or stains after annealing. Easy to remove.
Esters based synthetic lubricants for workings with chips removal.
Synthesis isoparaffinic solvent with excellent detergent, dewatering and protective power. It totally evaporates and leaves a clean and dry surface.
Evaporable isoparaffins based detergent lubricant for not heavy operations
Acid liquid product, free of nitric acid, suitable to remove the black patina formed on die casting alloys of aluminium, pickled with alkaline solutions.
Alkaline liquid product with low emission of hydrogen. Suitable for aluminium and its alloys, used to degrease and simultaneously pickle.
Ultrafiltration unit for the continuous regeneration of degreasing baths