LONG PRODUCTS > MULTIMETAL > TITANIUM AND ALLOYS




ADDITIVO MIX TN

Degreasing additive to add to degreasing and pickling baths working at spray and dip.

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



CONDORINE 109

Alkaline liquid product. To be used no rinse for degreasing and simultaneous protection of steel surfaces. To be used by spray or immersion. No following rinse required.

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



CONDORINE 841 CM

Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates. It is mainly used to remove the polishing pastes. e.g in plating lines.

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



CONDORINE 841 SP

Slightly alkaline powder product. Suitable for any metal, free of caustic soda and ligninsulphonates, is mainly used to remove by spray the polishing pastes. E.g. in plating lines.

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



CONDORINE R 64

Condorine R 64 is a low impact product designed for all metals and any kind of plastic. It is mainly used to remove oils and greases from highly contaminated pieces, mainly by dissolving them. No rinse. It evaporates very quickly with air.

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



CONDORINE R66

Evaporable detergent mainly used to remove drawing and rolling oils

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



DECAPANTE TI 70

It is mainly used in picking of medical prothesis, springs, bolts for aero space and auto motive industry, memory shaped springs and wire. The product, compared to TI 90, has the characteristic to be also free of hydrofluoric acid and to guarantee a zero hydrogen emission. Furthermore, by working at high concentration it is possible to get a levelling of the metal roughness and to make the surface smooth and bright. The absence of hydrofluoric acid allows to use stainless steel tanks, to avoid suction plants and particular individual protection devices besides having in the factory a HARMLESS product.

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



DECAPANTE TI 80

Nitric and hydrofluoric acid free product. It leaves the surface bright and avoids hydrogen emissions and consequent metal embrittlement. When used at high concentration it can also bright the surfaces. The product is used in treatment of Nickel titanium alloys with memory form

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION



DECAPANTE TI 90

It is mainly used in pickling of welded tubes , annealed tubes, rods and equipments for chemical and petrochemical industry. In its formula there is a moderate concentration of free hydrofluoric acid that allows to get high pickling speed. Depending upon operative conditions it is possible to decide the metal etching degree up to eliminate eventual superficial defects and to produce a homogenously satin finished surface.

DOWNLOAD TECHNICAL
REQUEST MORE INFORMATION


Back to top ^

3

Back to top ^