TUBOLAR PRODUCTS > CARBON STEEL > DRAWING
Liquid activator based on titanile salts
Conversion treatment, for cold forming and drawing, microcrystalline zinc phosphates based.
Mixed iron zinc phosphate, low sludge production, self-accelerated to chlorates. Nickel free.
Calcium Zinc phosphate accelerated to nitrites for the production of light tubes. Nickel free.
Corrosion inhibitor for carbon steel pickling with sulphuric acid. The Product increases the dissolution rate of the oxides and inhibits the base metal etching
Highly rinsing alkaline degreaser-dephosphating
Non-reactive water based polymeric lubricant, for cold forming of carbon steel, stainless steel and non-ferrous materials. Compared to the traditional polymeric lubricants, it is suitable for high reductions. Condorlube DF 18 can be used in substitution of the traditional conversion treatments (phosphating and oxalating) or salting.
Classic reactive oil based on polyphosphoric acids
Chlorine free synthetic lubricant for drawing of stainless steel rods and tubes.
Chlorine free synthetic lubricant for drawing of carbon steel rods and tubes.
Chlorine free, synthetic lubricant for drawing of high alloys and stainless steel rods and tubes.
Chlorine free synthetic lubricant for drawing of high alloys and stainless steel bars and profiles.
New formula based on polymers used on replacement of the three steps: phosphating – rinse – soaping For high deformations.
New polymer based product used as replacement of the three steps of phoshpating (or oxalation) - rinse - soaping in drawaing of tubes with big diameter