TUBOLAR PRODUCTS > MULTIMETAL > COPPER AND BRASS
Degreasing additive to add to degreasing and pickling baths working at spray and dip.
Acid product for nitric acid, nitrates and chromates free eletropolishing on copper and alloys surface
Product for the protection of copper and brass surfaces. It is applied diluted in demi water
Slightly alkaline degreaser used for the degreasing in immersion or spray plants
Slightly alkaline liquid product. Suitable for degreasing of copper alloys also for quick operation in line. It avoids hydroxides precipitation and is chosen when an alkaline passivation with triazoles follows. To be used also by spray.
Evaporable detergent mainly used to remove drawing and rolling oils
Alkaline powder degreaser ideal for carbon steel and copper alloys. Formulated to remove oils, greases and rolling pastes.
Special fluid with highly selected synthetic bases and oily additives to be used as antiwear in both light and heavy skiving and roller burnishing with recirculation plants
Detergent, lubricant and protective mainly used in straightening
Synthesis isoparaffines solvent based product, low VOC and excellent detergent, dewatering and protective power. It forms a dry to touch surface.
Nitric free product for chemical polishing of copper and brass surface
Dosed in the sulphuric acid pickling solutions it speeds up the oxide removal and the elimination of cracked oil. Used on copper and brass surfaces it avoids the dezincification and the reddish spots formation
Slightly acid liquid for copper and brass passivation - free of chromates.
Electrolysis unit for the regeneration of sulphuric acid and recovery of metallic copper and zinc.
Ultrafiltration unit for the continuous regeneration of degreasing baths